EXQUISITELY CRAFTED METAL TILES MADE IN THE USA
C109 Crown Molding, 7.00" concave pattern, 8.75" total width
Available Options
Installation Type *
Color & Finish *
Qty *
|
C109 - 7" concave pattern area with
8.75" total width Sold in sets of (2) 27" long
pieces. Once the pattern is overlapped during installation, you can
expect at least 48" of linear coverage per set. The Concave orientation of this molding means
that the curve is towards the 90 degree corner where the ceiling
and wall come together. |
Made in the U.S.A. of
tin-plated sheetmetal
This product can be
ordered raw (unfinished) or, for an additional cost, can be powder coated or
painted in any color that we offer.
Note: 7.00" face measurement is taken with molding installed at 45 degree angle from ceiling to wall.
When determining amount needed for project: Determine linear feet around perimeter of room. Take the linear feet and divide by four (4) feet. This will give you the number of pieces to order. The four feet dividing number will account for the overlap of crown molding when installing.
